The numbers speak for themselves – construction, along with renovation and demolition (CRD) waste has long been one of the largest waste streams in Canada (e.g. wood, asphalt roofing, drywall, etc). Further, unlike waste streams of similar size such as municipal solid waste and organics/food waste, CRD waste has been relatively untouched by regulation in either its generation or its disposal. This appears about to change.
CAP Required EPR for CRD Wastes by 2017
The Canadian Action Plan for Extended Producer Responsibility, CCME, September 2009, (the CAP) included important cross-country commitments by every province and territory to require EPR for CRD wastes within 8 years of the CAP.
CRD waste was to be subject to EPR along with “Phase I” wastes and other “Phase 2” wastes such as furniture, textiles, carpeting and appliances. While there has been demonstrable success among the provinces and territories with Phase I material EPR programs, the inverse has been true for Phase II, including for CRD waste:
Despite these documented successes, there continues to be major challenges. Firstly and most importantly, the CCME goal for action by 2017 on the Phase 2 product list (construction and demolition materials, furniture, textiles and carpet, appliances and ozone depleting substances) will not be met. Construction and demolition materials are a major component of the solid waste stream both by weight and percentage and despite a few studies, small pilot programs and private initiatives there has been little progress in this area.
Overview of the State of EPR in Canada: What Have We Learned?, EPR Canada, September 2017
From the Shadows to the Spotlight?
Sceptics might ask why CRD waste cannot simply remain in the regulatory no-man’s land between unfettered disposal and comprehensive waste management- namely, the soft industry CRD waste goals.
After all, Ontario has quietly dropped CRD waste from its circular economy commitments. The former administration’s 2016 Strategy for a Waste-Free Ontario: Building a Circular Economy, called for the construction and demolition sectors to dramatically increase resource recovery efforts, including through amendments to the “3 Rs” Industrial, Commercial & Institutional Sectors waste regulations. Since then, CRD waste has vanished from the province’s EPR regulatory agenda (other than in respect of soils). But perhaps, EPR alone was never the answer for all CRD materials.
The Canadian Council of Ministers of the Environment (CCME), after a 3-year consultation and policy development process, aims to return CRD waste to the policy forefront with a much broader and more robust set of policy requirements to reduce and resource recovery CRD waste.
CCME Aims to Change CRD Industries
The new CCME Guide for Identifying, Evaluating and Selecting Policies for Influencing Construction, Renovation and Demolition Waste Management, 2019 contains a nearly exhaustive study of the policy options provinces and territories may adopt in reducing and diverting CRD waste.
Among the options presented:
- Permitting process to better incorporate CRD waste reduction and diversion;
- Producer responsibility programs for flooring, drywall, window glass, brick, asphalt roofing and engineering/treated wood;
- Restrictions upon CRD waste transportation and disposal bans;
- Levies upon virgin materials and non-divertible CRD wastes;
- Building code, certifications and standards changes to require CRD waste reduction/diversion; and
- Public procurement to include CRD waste management.
Clearly, the days of the 3Rs as exhaustive CRD waste regulation are numbered.
Regional Approaches to CRD Regulation
In some of the CCME waste / EPR policies, typically relating to specific products and consumer materials, there is an understandable push for cross-Canada uniformity of approach and related regulatory requirements.
For CRD waste, however, the CCME allows a combination of the best policy options above to be “tailored to [a jurisdiction’s] unique political, economic and market conditions.” How to resolve local and regional needs with industry’s desire for consistent and transparent national standards will be just one of many areas of interest to CRD industries.
___
The CCME has arguably laid out a detailed and instructive regulatory roadmap for CRD wastes. It is now up to the CRD industries and their partners to determine how to make the most out of these challenges and opportunities across Canada.
